Garden Accessories

3.2 cu ft Neocision Lab Certified Vacuum OvenBest Value Vacs vacuum ovens are purpose-built to perform degassing / purging of light hydrocarbon solvents. The oven applies a gentle heat under reduced pressure conditions to expedite solvent degassing while simultaneously preserving color, aroma, and overall solute quality. BVV has applied their extensive vacuum expertise and industry experience to produce a series of ovens designed exactly for your needs: low consumption, high-throughput, and reliable operation.Features:• 3.2 cu ft interior space• 4 Individually heated shelves• Independent PID for each shelf• LED lighting in door• Automatic overtemperature shutoff• Built-in resettable circuit breaker• Heavy duty casters with adjustable leveling feet• ETL CertifiedBenefits:• Shelf heating yields faster purge times• Removes residual solvent to low ppm• Each shelf can be set to different temperatures• Allows purging of multiple runs of the extractorIncludes:• 3.2cf Vacuum Oven• KF-25 to ¼” JIC adapter with clamp• ¼” HVAC hoseTechnical Specs:• Dimensions: 30” Width, 27” Depth, 27” Height• Weight: 260 lbs• Voltage: 120V• Frequency: 60Hz• Power: 1050W• Current: 16A• Vacuum Range: -1 – 0 bar/-14.5 – 0 psi• Operating Temperature Range: RT + 18 °F - 212°F• 304 Stainless Steel Interior Chamber• Temperature Stability:  ±1.0°F• Temperature Uniformity: within 4% of temperature setpoint• Heat-Up Time: 20 minutes to preheat.• Ultimate Vacuum: <500 µmHg / mTorr / micron• Time to Vacuum: 5 minutes to -1 bar using 12cfm 2-stage vacuum pump• Shelf Capacity: 293 in2

Read more less

8.5 lb Icarus True Dewax Closed Loop ExtractorThe Icarus unit shares the same function of the standard Bi-directional extractors, but features rack mounting for ease of use. It is also the 8.5lb True Dewax unit. By utilizing an input manifold for the solvent, the user can switch from bottom flood to a top input on the material column. This method ensures that all material has been saturated and rinsed of oils on the first run. The oil-bearing solvent then dumps into a sleeved spool, where it is chilled with dry ice. Once the solvent has chilled, waxes and lipids will coagulate and fall out of the solution. The solution is then filtered and dumped into a collection base. The rack unit comes standard with a port for nitrogen assistance.Features:• Up to 8.5lb material capacity• Bi-directional solvent input• Secondary dewaxing• Solvent reclamation• Jacketed base for temperature control circulation• Drain valve for easy removal of extract• Sight glasses on collection base• 100 micron filtration built into gasket• Rack Mounting• Jacketed LP with internal condensing coilBenefits:• Rack mounting to prevent heavy lifting• Maximum oil yield• Full dewaxing without second solvent• Save money with solvent reclamation• Nitrogen assist to prevent vapor lockIncludes:• Extruded aluminum rack with pipe hangers• 50L jacketed collection base• #100 LP tank• Solvent input manifold• 6” x 36” material column• 8” x 36” dewaxer with filter assembly• Stainless steel braided PTFE hoses• Buna-N tri-clamp gaskets• High pressure clampsADDITIONAL EQUIPMENT REQUIRED FOR OPERATION OF UNIT.  THIS UNIT REQUIRES A VACUUM PUMP, DRY ICE, NITROGEN TANK WITH REGULATOR, AND HEATER CIRCULATOR TO FUNCTION.It is also recommended to have a refrigerant scale to operate this unit.  Chiller can be used with the jacketed LP tank for dual recovery condensing.A Pro Series 21 cfm (BVVPS212B) vacuum pump is recommended for this system.Technical Specs:Dimensions: 68” Width x 78” Height, 30” DepthWeight: 500 lbsMax Allowable Working Pressure: 150 PSIOperating Temperature Range: -40F – 200F304 Stainless Steel ConstructionHigh Polish InteriorSolvent Capacity: 50 lbs

Read more less

1 lb Orthrus MK-V Bi-Directional Closed Loop Extractor The 1 lb MK-V Bi-Directional closed loop increases efficiency by utilizing both a bottom and top solvent input. By using a bottom flood on the first wash, you ensure all material has seen solvent. This method prevents channeling through the material. Finish the run with a top flood input to ensure all residuals have been washed from the material. Oil bearing solvent is collected in the collection base under the material column. Once collected, solvent is distilled and recovered, leaving the oils in the collection base. This is a passive unit that utilizes pressure differences created by manipulating temperature to move solvent. Unit comes with a sleeved column for dewaxing.Features:• Up to 1lb material capacity• Bi-directional solvent input• Solvent reclamation• Sleeved column for removal of plant waxes• Splatter platter collection case for easy extract removal• Sight glasses on collection base• 100 micron filtration built into gasket Benefits:• Maximum oil yield• Save money with solvent reclamation• Fast extraction and recovery speed• Dewaxing column yields higher quality extractIncludes:• 6” x 12” collection base• #30 LP Tank• Solvent input manifold• 3” x 24” sleeved material column• Stainless steel braided PTFE hoses• Buna-N tri-clamp gaskets• Single pin clampsADDITIONAL EQUIPMENT REQUIRED FOR OPERATION OF UNIT. THIS UNIT REQUIRES A VACUUM PUMP AND DRY ICE TO FUNCTION.It is also recommended to have a refrigerant scale and nitrogen tank with regulator to operate this unit.A VE115 3cfm (BVVVE280) vacuum pump is recommended for this system.Technical Specs:Dimensions: 13 ¼” Diameter x 64” Height Weight: 53lbsMax Allowable Working Pressure: 150 PSIOperating Temperature Range: -40F – 200F304 Stainless Steel ConstructionHigh Polish InteriorSolvent Capacity: 6lbs

Read more less

1 lb Apollo Dewaxing Closed Loop ExtractorThe 1 lb Apollo Dewaxing closed loop is a great introductory unit for small scale production. The 1 lb closed loop hydrocarbon extraction system performs botanical extraction within a sealed, vacuumed system. Utilizing a top-fill input, solvent washes through the material column, collecting oils as it passes over the material. Oil bearing solvent is collected in the collection base under the material column. Once collected, solvent is distilled and recovered, leaving the oils in the collection base. This is a passive unit that utilizes pressure differences created by manipulating temperature to move solvent.Features:• Up to 1 lb material capacity• Solvent reclamation• Sleeved column for removal of plant waxes• Splatter platter collection base for easy extract removal• Sight glasses on collection base• 100 micron filtration built into gasket Benefits:• Save money with solvent reclamation• Fast extraction and recovery speed• Dewaxing column yields higher quality extractIncludes:• 6” x 12” collection base• #30 LP tank• 3” x 34” material column• Stainless steel braided PTFE hoses• Buna-N tri-clamp gaskets• Single pin clampsADDITIONAL EQUIPMENT REQUIRED FOR OPERATION OF UNIT. THIS UNIT REQUIRES A VACUUM PUMP AND DRY ICE TO FUNCTION.It is also recommended to have a refrigerant scale and nitrogen tank with regulator to operate this unit.A VE115 3cfm (BVVVE115) vacuum pump is recommended for this system.Technical Specs:Dimensions: 10” Diameter x 63” HeightWeight: 46 lbsMax Allowable Working Pressure: 150 PSIOperating Temperature Range: -40F – 200F304 Stainless Steel ConstructionHigh Polish InteriorSolvent Capacity: 6 lbs

Read more less

3 CFM Single Stage Mini Vacuum PumpThis is the Best Value Vacs MINI 3 CFM Single Stage Vacuum Pump it is designed and built to be economical, efficient and effective while being very lightweight and easily transported or carried around.Key Features:• Internal check valve• Oil mist filter cap• Miniaturized for easy transport• Lightweight• Rubber feet for noise dampening• Reliable, economical and efficientSpecifications:Free Air Dispalcement - (CFM)  3 CFM# Of Stages:  1Voltage:  120v / 60HzUltimate Vacuum:  150 MicronRPM:  1720HP: 1/6Oil Capacity: 220mlDimensions LxWxH  11" x 4" x 7"Weight:  8 lbsIntake Connection:  1/4" SAE

Read more less

Pro Series 21.2 cfm Corrosion Resistant Two Stage Vacuum PumpBest Value Vacs Pro series are their most impressive line of rotary vane pumps available. Known for their high degree of efficiency and deep ultimate vacuum, all Pro models feature a dual-stage, chemical-resistant pump configuration designed to handle abusive, extended vacuum evacuations. Capable enough to comfortably handle laboratory and scientific applications, these pumps are also extremely simple in operation and require minimal maintenance.Features:• PTFE chemical resistant pump vanes provide superior corrosion resistance and reliability.• Large oil reservoir and adjustable gas ballast standard on every model to increase pump oil lifetime.• Internal check-valve included in every unit, prevents accidental pump oil backflow.• Exhaust oil filter trap included.• DEEP ultimate vacuum and KF25 inlet for optimal pumping speed.• Lightweight, with noise-dampening rubber feet.• Rugged, reliable, economical, and efficient pump designed for day in, day out use.Includes:• 21.2 cfm vacuum pump• Exhaust filter• Power cord• Vacuum pump oilTechnical Specs:• Dimensions:• Weight: 95 lbs• Vacuum Inlet: KF25• Ultimate Vacuum: 0.3 micron (6 micron with ballast)• Voltage: 120v• Motor Power: 1.5 HP• Noise Level: <58 dB• Oil Capacity: 2000 ml• Exhaust Fitting Size: M24

Read more less

135g Mini XL Dewax Closed Loop Extractor The BVV Mini XL closed loop extractor is perfect for the connoisseur. The small batch production of this machine is best suited for personal runs or test batches of a new material source. Welded sleeve allows the user to freeze the material column with dry ice. This method reduces the amount of waxes and lipids extracted from the material. Simple, straight forward design makes operating this machine reasonable for people of all skill levels. This is a passive unit that utilizes pressure differences created by manipulating temperature to move solvent.Features:• 90-135 gram material capacity• Sleeved material column for dry ice wax removal• Solvent reclamation• Splatter platter collection base for easy extract removal• Inline ball valve to stop flow from material column and collection base• Inline sight glass to see solvent move from column to base• 100 micron filtration built into gasketBenefits:• Save money with solvent reclamation• Fast extraction and recovery speed• Dewaxing column yields a higher quality extractIncludes:• 4” x 8” collection base• 4” x 8” reclaim tank• 1.5” x 18” sleeved material column• 48” stainless steel hose• Buna-N tri-clamp gaskets• Single pin clamps• Inline sight glass• Inline ball valveADDITIONAL EQUIPMENT REQUIRED FOR OPERATION OF UNIT.  THIS UNIT REQUIRES A VACUUM PUMP AND DRY ICE TO FUNCTION.It is also recommended to have a refrigerant scale and nitrogen tank with regulator to operate this unit.A VE115 3cfm (BVVVE115) vacuum pump is recommended for this system.Technical Specs:Dimensions: 5” Diameter x 44 5/8” Height Weight: 23 lbsMax Allowable Working Pressure: 150 PSIOperating Temperature Range: -40F – 200F304 Stainless Steel ConstructionHigh Polish InteriorSolvent Capacity: 1.5 lbs

Read more less