Lighting Accessories

The Phantom PHOTOBIO Advanced Quantum PAR Meter provides accurate and cost-effective measurement for any light source used in horticultural applications.  The Advanced Quantum PAR meter is designed to measure PAR (Photosynthetically Active Radiation) flux in wavelengths ranging from 400 to 700nm. There is a positive proportional relationship between the number of photons absorbed in 400 to 700nm band and the rate of photosynthesis, important for maximizing crop yield.  Complete with compact main unit, remote sensor, two connection cables (short-coiled & 12’ long-straight), AAA batteries and protective carrying case.  Convenience of storing up to 99 measurements for easy reference while adjusting light fixture height, dimmer setting and other environmental changes throughout each phase of growth. Phantom has a long-standing track record of providing reliable, high-performance products within the horticultrual equipment industry. Compact, portable meter with highly accurate remote quantum sensor Simple and easy to use operation, with storage of up to 99 readings Ideal for grow tent, greenhouse and commercial grow applications Compatible with modern sole-source and supplemental LED fixtures, high pressure sodium (HPS) DE grow lights, as well as any traditional indoor grow light source

Read more less

10' 18AWG WT Locking 277V, L7-20P Harness.  Designed for use with PHOTOBIO LED fixture models CX, MX, T, TX and Phantom 60 Series DE 277V fixtures.  This "plug & play" harness provide the benefit of simple AC power connection and disconnection at fixture level. Features: IP rated connectors allow safe "plug & play" power transmission and are dust and liquid resistant.   The 10’ UV resistant power cable is white in color to maximize light reflectivity. **Now also available is the PHOTOBIO AC POWER DISTRIBUTION TREE, a modular cabling system that enables interconnectivity of multple fixtures on a single AC power drop.  Providing significant cost savings on electrical infrastructure and labor while offering superior safety and flexibility versus traditional NEMA power plugs and outlets.  Contact your rep for more information.

Read more less

10' F 18AWG WT locking 277V, L7-15P.  Designed for use with Phantom PHOTOBIO LED fixture models CX, MX, T and TX.This "plug & play" harness provides the benefit of power connection and disconnection at the fixture level, reducing liability, electrical infrastructure costs, and labor costs.Features:• Durable 10’ length providing flexibility on proximity to available electrical outlet.• IP connector allows safe "plug & play" power transmission with dust and liquid resistance.  • The UV resistant power cable is white in color to maximize light reflectivity.

Read more less

10' F 16AWG WT 208-240V Plug, 6-15P.  Designed for use with Phantom PHOTOBIO LED fixture models CX, MX, T and TX.This "plug & play" harness provides the benefit of power connection and disconnection at the fixture level, reducing liability, electrical infrastructure costs, and labor costs.Features:• Durable 10’ length providing flexibility on proximity to available electrical outlet.• IP connector allows safe "plug & play" power transmission with dust and liquid resistance.  • The UV resistant power cable is white in color to maximize light reflectivity.

Read more less

10 ft 16AWG WT 110–120V Plug, 5-15P.  Designed for use with Phantom PHOTOBIO LED fixture models CX, MX, T and TX.This "plug & play" harness provides the benefit of power connection and disconnection at the fixture level, reducing liability, electrical infrastructure costs, and labor costs.Features:• Durable 10’ length providing flexibility on proximity to available electrical outlet.• IP connector allows safe "plug & play" power transmission with dust and liquid resistance.  • The UV resistant power cable is white in color to maximize light reflectivity.

Read more less

10' F 16AWG WT w/ bare wire leads.  Designed for use with Phantom PHOTOBIO LED fixture models CX, MX, T and TX.This "plug & play" harness provides the benefit of power connection and disconnection at the fixture level, while the bare wire leads are wired directly into a junction box, eliminating the cost of a traditional plug/receptacle to reduce contractor labor expense.   Features:• Durable 10’ length providing flexibility on proximity to available electrical connection.• IP connector allows safe "plug & play" power transmission with dust and liquid resistance.  • The UV resistant power cable is white in color to maximize light reflectivity.

Read more less

20' Mini 3P(M) to Mini 3P(F) WT data link cable, IP65, RF. Intended to connect Autopilot PX2 controller to the first PHOTOBIO CX fixture.  Does not interconnect PHOTOBIO CX fixtures

Read more less

The PHOTOBIO DC 0-10V Communication Tree enables multiple LED fixtures to be interconnected and controlled from a centralized location.  The rugged modular system focuses on signal integrity, consistency, and reliability while offering fast, simple, and secure connections from the first fixture to the last.  Designed to excel in rigorous Indoor Farm and Greenhouse conditions, PHOTOBIO DC Communication Tree locking connections are IP67 rated providing complete dust protection and protection against temporary submersion in water.  From the centralized controller, the PHOTOBIO DC Communication Tree is fully plug and play, providing fast and secure locking connections.  Straight “Trunk” lines, “Trunk with Branch” T control cables, and signal repeaters are used in combination to suit your unique needs.  Hydrofarm’s grower-centric, full-service lighting design services are complimentary to ensure our partners grow! Contact Us For use with PHOTOBIO MX, TX and T LED fixtures and is fully compatible with Autopilot PX(2+) Series Advanced Lighting Controllers.  This item, the PHOTO•LOC 0-10V Signal Repeater is an inline device used to carry and repeat DC communications signal.  Designed for placement after extended Control Cable “Trunk” lines and throughout lighting zones to maintain DC communications signal integrity against voltage drop.  Recommend use in a 1:5 ratio with PHOTO•LOC T Cables; One Signal Repeater after every five fixtures. Recommended use in a 1:1 ratio with extended run 300’ PHOTO•LOC Control Cable; One Signal Repeater for every 300’ long Control Cable “Trunk” line. Features 16’ 18AWG braided flexible copper wiring with convenient 3P-2P push lock connections, EMC suppression technology to mitigate electromagnetic interference and is UV resistant.  Device, cable and connections rated IP67 for enhanced water and dust protection.

Read more less

PHOTOBIO-VP 18” Power Link Cable, 18AWGHydrofarm offers a complete line of PHOTOBIO•VP LED fixture cable harnesses. These "plug & play" harnesses provide the benefit of power connection and disconnection at the fixture level, reducing liability, electrical infrastructure costs, and labor costs.The Power Link Cable allows linking of fixtures between aisles or levels on vertical racking systems.Features: Mini IP connectors allow safe "plug & play" power transmission and are dust and liquid resistant.   UV resistant power cable

Read more less

PHOTOBIO MX 16' Remote Driver Kit allows the power supply to be mounted remotely separate from light emitting portion. Contain: (2) 16' WT IP65 DC cable (1) Truss hanger

Read more less

The PHOTOBIO DC 0-10V Communication Tree enables multiple LED fixtures to be interconnected and controlled from a centralized location.  The rugged modular system focuses on signal integrity, consistency, and reliability while offering fast, simple, and secure connections from the first fixture to the last.  Designed to excel in rigorous Indoor Farm and Greenhouse conditions, PHOTOBIO DC Communication Tree locking connections are IP67 rated providing complete dust protection and protection against temporary submersion in water.  From the centralized controller, the PHOTOBIO DC Communication Tree is fully plug and play, providing fast and secure locking connections.  Straight “Trunk” lines, “Trunk with Branch” T control cables, and signal repeaters are used in combination to suit your unique needs.  Hydrofarm’s grower-centric, full-service lighting design services are complimentary to ensure our partners grow! Contact Us For use with PHOTOBIO MX, TX and T LED fixtures and is fully compatible with Autopilot PX(2+) Series Advanced Lighting Controllers.  This item, the PHOTO•LOC 0-10V Control Cable is a 16’ straight “Trunk” line used to carry DC communications signal.  Designed to make the initial connection from a centralized controller, connect levels, round corners, bridge aisles, provide necessary give for multi-layer rack systems and interface with PHOTO•LOC T Cables or Signal Repeaters. Features 16’ 18AWG braided flexible copper wiring with convenient 2P male to female push lock connections and is UV resistant. Cable and connections rated IP67 for enhanced water and dust protection. *Can also be used as a 16' Power Link Cable with PHOTOBIO VP LED fixtures.

Read more less

The PHOTOBIO DC 0-10V Communication Tree enables multiple LED fixtures to be interconnected and controlled from a centralized location.  The rugged modular system focuses on signal integrity, consistency, and reliability while offering fast, simple, and secure connections from the first fixture to the last.  Designed to excel in rigorous Indoor Farm and Greenhouse conditions, PHOTOBIO DC Communication Tree locking connections are IP67 rated providing complete dust protection and protection against temporary submersion in water.  From the centralized controller, the PHOTOBIO DC Communication Tree is fully plug and play, providing fast and secure locking connections.  Straight “Trunk” lines, “Trunk with Branch” T control cables, and signal repeaters are used in combination to suit your unique needs.  Hydrofarm’s grower-centric, full-service lighting design services are complimentary to ensure our partners grow! Contact Us For use with PHOTOBIO MX, TX and T LED fixtures and is fully compatible with Autopilot PX(2+) Series Advanced Lighting Controllers.  This item, the PHOTO•LOC 0-10V T Cable is a linkable 8.0’ long “Trunk” with 5.0’ long “Branch” line that allows DC communications signal to interconnect multiple PHOTOBIO fixtures on a single centralized controller.  PHOTO•LOC T Cables are used in a 1:1 ratio; one fixture to one PHOTO•LOC T Cable and provide Male to Female daisy chain of “Trunk” line for connection to either central controller, jumper cable, or T cable from adjacent fixture. Features 18AWG braided flexible copper wiring, convenient push lock connections and is UV resistant. Cable and connections rated IP67 for enhanced dust and water protection. 

Read more less