Lighting Accessories

Adjust-a-Drive MOTOR ONLY This item is a replacement motor for the LightRail 4.0 AdjustaDrive light mover. It has both a 0- to 60-second adjustable time delay for promoting even growth from end to end plus the added feature of two to four feet per minute adjustable speed control that covers a wide range of lamp intensities and travel distances. Comes complete with installation hardware and instructions. Note: No rail is included. 

Read more less

Adjust-a-drive motor w/6' rail plus mounting hardware The all new LightRail 4.0 AdjustaDrive is the newest linear light mover available from Gualala Robotics Inc. For a rectangular growing area, a linear lamp moving system is preferable. The self-propelled Light Rail 4.0 Adjust-a-Drive is without question the finest linear lamp-mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 4.0 Adjust-a-Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6 foot track may also be extended. Light Rail 4.0 comes with a 2 Year Factory Warranty. With both a 0 to 60 second adjustable time delay for promoting even growth from end to end and a two to four feet per minute adjustable speed that covers a wide range of lamp intensities and travel distances, the all new LightRail 4 AdjustaDrive from Gualala Robotics Inc. is the ultimate in light mover control. Compatible with all LightRail 3.0 and 3.5 rails and accessory items. Designed and manufactured in the USA. Light Rail 4.0 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs RPM is adjustable from 6 RPM (2 ft/min) to 10 RPM (4 ft/min)

Read more less

3-foot extension rail to extend a six-foot rail system to nine feet. 3 alignment pins & necessary mounting hardware included.

Read more less

RoboStik For LightRail 3.0, 3.5 and 4.0 The RoboStik is used for hanging a horizontal reflector from a LightRail 3.0, 3.5 or 4.0 perpendicular to the direction of travel. This item is not needed when hanging a horizontal reflector parallel to the direction of travel, but many creative uses have been found for them. It is packaged with hardware and instructions in a white box with label tape. Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

Read more less

For a rectangular growing area, a linear lamp moving system is preferable. The self-propelled Light Rail 3.5 Intelli-Drive is without question the finest linear lamp mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 3.5 Intelli Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6 foot track may also be extended. Light Rail works great with all reflectors!Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

Read more less

LightRail 3.5 IntelliDrive 10 RPM motor travels approximately 4 feet per minute and has a 0-60 second adjustable time delay for pausing the lamp at the ends of its travel. This helps to promote even growth from end to end and allows for equal light-time for the entire run. It comes complete with installation hardware, instructions and a 2-year manufacturer’s warranty. Note: No rail is included. Great for customers who already have a rail or prefer the one-piece 2 meter rail. Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

Read more less

10 RPM IntelliDrive motor (LR3.5ID9) w/6' rail plus mounting hardware For a rectangular growing area, a linear lamp moving system is preferable. The self propelled Light Rail 3.5 IntelliDrive is without question, the finest linear lamp-mover available. It uses no pulleys, chains or gears. Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 3.5 IntelliDrive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6-foot track may also be extended. Light Rail 3.5 comes with a 2 Year factory warranty. Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

Read more less

Switch Stop Kit for LightRail 3.0, 3.5 and 4.0 For replacing the occasional misplaced switch stop. The SS KIT comes with 3 pairs of switch stops and that equals 6 thumb screws and 6 slide nuts. Packaged in a 4" x 4" ziplock. Light Rail 3.5 is rated to 35 lbsLight Rail 5.0 is rated to 100 lbs

Read more less

Use these strong stainless steel V-shaped hanger hooks to suspend most Hydrofarm reflectors (with the exception of models having integrated hangers) and PARsource GLS and GLX reflectors (remote series).       

Read more less

100 feet of chain, which may be separated out to preferred lengths. Resistant to corrosion, this chain can be used to support your reflectors, fans, smaller carbon filters and other equipment.

Read more less

The Phantom PHOTOBIO Advanced Quantum PAR Meter provides accurate and cost-effective measurement for any light source used in horticultural applications.  The Advanced Quantum PAR meter is designed to measure PAR (Photosynthetically Active Radiation) flux in wavelengths ranging from 400 to 700nm. There is a positive proportional relationship between the number of photons absorbed in 400 to 700nm band and the rate of photosynthesis, important for maximizing crop yield.  Complete with compact main unit, remote sensor, two connection cables (short-coiled & 12’ long-straight), AAA batteries and protective carrying case.  Convenience of storing up to 99 measurements for easy reference while adjusting light fixture height, dimmer setting and other environmental changes throughout each phase of growth. Phantom has a long-standing track record of providing reliable, high-performance products within the horticultrual equipment industry. Compact, portable meter with highly accurate remote quantum sensor Simple and easy to use operation, with storage of up to 99 readings Ideal for grow tent, greenhouse and commercial grow applications Compatible with modern sole-source and supplemental LED fixtures, high pressure sodium (HPS) DE grow lights, as well as any traditional indoor grow light source

Read more less

This product is a precision instrument used to measure luminance (footcandles). The meter is fully cosine corrected for the angular incidence of light, meaning that if you are not holding the sensor perfectly perpendicular to the light source, the sensor will still read the light correctly. The sensor is stable and made of a long-life silicon photo diode. The digital light meter accurately measures to 40,000 FC. The meter’s built-in low battery indicator means you’ll never be caught by surprise by a low-power product. Features Measures grow lights or sunlight Measures up to 40,000 footcandles 3 scales for precise readings Convenient hand-held remote sensor Includes informative booklet with lighting recommendations 99% + accuracy, less than 1% inaccuracy

Read more less